Registration of the Axis camera at the Premium gateway.
You have the option of registering cameras from the manufacturer Axis, provided that they support the ONVIF protocol T.
The following steps are necessary for registration.
- Start up the camera via the PC interface according to the manufacturer's instructions.
Notes:
The configuration cannot be done via app.
The user of the Axis camera is root. - Check the camera's firmware and update it if necessary.
To do this, click on Settings > System > Maintenance
Note:
To be able to download new firmware from the Axis site, a user account must be created. - Create an ONVIF user.
To do this, click on Settings > System > ONVIF.
It is sufficient that this user is set with the profile Operator. - To use the camera's motion detection in the Premium gateway, please activate Motion Detection under Settings > Apps > Axis Video Motion Detection.
- Now you can start the login mode on the Premium gateway. If the camera is in the same network as the Premium gateway, it will be displayed as a new device after a short time. Click on "Login" and enter the access data of the ONVIF user that you have created on the camera.
Important: You do NOT have to enter the access data of the camera here.
You can use the camera's motion detection as an event in triggers and thus trigger complex scenes.
You can also have pictures sent to you by e-mail via the Premium gateway as soon as motion is detected. To do this, the notification is activated in the trigger under THEN.
In addition, all functions of the Axis camera can of course still be used.
Note: Only individual images are displayed in the HOMEPILOT app. You can call up a live image via apps from Axis. Information on this can be found on the Axis website.
https://www.axis.com/de-de/products/axis-companion