Activate login mode: Smart sun and wind sensor
You can register up to 3 devices directly with the Smart sun and wind sensor. To register, the registration mode must be activated on both devices.
- Switch the device to be registered to the registration mode.
- If the display is off, press any button.
- Open the menu with the M button and select menu item 9 and confirm with OK.
- Here you can see how many devices are already registered with the sensor.
- Tap the plus button once to start the login mode.
- The two devices will search and find each other.
If the registration is successful, the motor will jerk several times. Once, the registration is acknowledged and at the same time the sun and wind automatics are switched on. The sun position is also set to 100%.
If you want to control more than 3 devices with the Smart sun and wind sensor, you can register the sensor with the Premium gateway and thus theoretically control up to 99 devices.