Activate login mode: Smart thermostat premium
Activate login mode:
To activate the login mode on the Smart thermostat premium, open the menu with the menu button (M) and select System settings with the settings button.
Open the menu 9-9-1.
The number of registered DuoFern devices is displayed. In our example, one device is registered.
Switch the respective DuoFern device to the login mode.
Start the registration process with the setting button.
On flashes in the display.
After successful registration, the new number of registered devices appears.
Register the next DuoFern device or return to the menu selection with the menu button (M).
Note! Setting DuoFern mode - DuoFern receiver
If the Smart thermostat premium is registered with the Premium gateway, the DuoFern mode should be switched to receiver on the Smart thermostat premium. The Smart thermostat premium also has a complete time programme via which heating phases can be set. By switching to receiver, the Smart thermostat premium's own switching time programme is deactivated.
Menu item 9-9-2 to 1 (receiver)