Combination of Smart radiator valve and Smart door and window contact - Window open = heating off
The Smart door and window contact cannot be registered directly on the Smart radiator valve, but there are of course solutions.
1. Combination via the Premium gateway
Once both devices, i.e. Smart radiator valve and Smart door and window contact, have been registered on the Premium gateway, you can create two routines with which you can specify that the temperature is lowered to 4° when the window is opened and heated to 21° when the window is closed.
This will save you energy and reduce your heating costs.
2. Combination via the Smart thermostat premium
You can use the Smart thermostat premium as a central unit for your Smart radiator valve and thus also integrate the Smart door and window contact.
All Smart radiator valves are registered on the Smart thermostat premium. The Smart door and window contact is also registered. The complete control is now taken over by the Smart thermostat premium. Heating and lowering takes place at the set switching times and as soon as a window is opened, all registered radiator valves are closed until the windows are closed again.