Activate login mode: Smart thermostat premium
Activate login mode:
To activate the login mode on the Smart thermostat premium, open the menu with the menu key (M) and select System settings with the settings key.
Open the 9-9-1 menu.
The number of registered DuoFern devices is displayed. In our example, one device is logged in.
Switch the respective DuoFern device to the login mode.
Start the login process with the setting key.
On flashes in the display.
After successful registration, the new number of registered devices is displayed.
Log on the next DuoFern device or return to the menu selection using the menu button (M).
Note! Setting DuoFern mode - DuoFern receiver
If the Smart thermostat premium is registered with the Premium gateway, the DuoFern mode should be switched to receiver on the Smart thermostat premium. The Smart thermostat premium also has a complete time program via which heating phases can be set. By changing to receiver, the own switching time program of the Smart thermostat premium is deactivated.
Menu item 9-9-2 to 1 (receiver)