Reset Smart roller shutter motor premium. How can the motor be reset to factory settings?
Important:
After the reset, the end points must be taught in again and, if necessary, transmitters/sensors/central units must be registered again.
Reset via connection cable, only to be carried out by a qualified electrician:
To perform the reset, the power supply for the Smart roller shutter motor premium must be switched on (gray wire on L1).
In addition, the two control lines for Up (▲) and Down (▼) must be switched to phase (L) together for approx. 5 seconds.
A valid reset is acknowledged by a short press of the shutter motor.
Reset via Premium gateway:
If the Smart roller shutter motor premium is registered at the Premium gateway, you have the possibility to perform a reset via the smartphone.
Open the configuration of the motor. Two options are available under General.
With "Delete device settings", everything is deleted except for the registered devices.
With the "Factory reset" button, the Smart roller shutter motor premium is completely reset. All settings and all registered devices are deleted. All registered devices must then be registered again.