Reset addZ LED Smart bulbs: How can the addZ LED Smart bulbs be reset to the factory settings?

Detect delivery state

If an addZ LED Smart bulb is supplied with voltage and displays different colours one after the other, it is in the delivery state. This is the only way to register the addZ LED Smart bulb with the Premium gateway or another Zigbee central unit.

Necessity reset

An addZ LED Smart bulb can only be registered with a control panel if it is in the delivery state.
This applies to all lamps that work on the basis of Zigbee 3.0 technology.
There are two ways to reset an addZ LED Smart bulb.

1. reset by logging off

If the addZ LED Smart bulb is still registered with the Premium gateway, the logout function can be used. When logging out, the unit is logged out of the Premium gateway and reset to the factory settings at the same time.

2. reset by specific switch-on and switch-off

In this case, the voltage for the addZ LED Smart bulb must be switched on and off several times in succession. The switching must be done via a switch, i.e. not via the Premium gateway.

• The addZ LED Smart bulb must be switched off.
• Switch the light off and on again 5 times in succession for approx. 1 second.
  (on-off-on-off-on-off-on-off-on-off).
• when the light is then switched on again, the bulb must light up once in several colours to acknowledge the reset.