Registration of the Axis camera at the Premium gateway.
You have the possibility to register cameras from the manufacturer Axis, provided that they support the ONVIF protocol T.
The following steps are necessary for the registration.
- Put the camera into operation via PC interface according to the manufacturer's instructions.
Notes:
Configuration cannot be done via app.
The user of the Axis camera is root - Check the camera's firmware and update it if necessary.
To do this, click on Settings > System > Maintenance
Notice:
To be able to download new firmware from the Axis site, a user account must be created. - Create an ONVIF user.
To do this, click on Settings > System > ONVIF.
It is sufficient that this user is set with the profile Operator. - To use the camera's motion detection in the Premium gateway, please enable Motion Detection in Settings > Apps > Axis Video Motion Detection.
- Now you can start the login mode at the Premium gateway. If the camera is in the same network as the Premium gateway, it will be displayed as a new device after a short time. Click on "Login" and enter the credentials of the ONVIF user you created on the camera.
Important: You do NOT have to enter the access data of the camera here.
You can use the camera's motion detection as an event in triggers to trigger complex scenes.
You can also have images sent to you by e-mail via the Premium gateway as soon as motion is detected.
This is done by activating the notification in the trigger under THEN.
In addition, all functions of the Axis camera can of course still be used.
Note: Only single images are displayed in the HOMEPILOT app. You can call up a live image via apps from Axis. For more information, please visit the Axis website.