The radio code for logging in is missing. The device does not have a radio code.

Only devices that are difficult to reach when installed are supplied with a radio code. These are all flush-mounted actuators, the tubular motors and also the Smart weather sensor.

In the case of flush-mounted actuators, the radio code is printed on the back of the device and on a sticker attached to the device.

On the wireless tubular motor, the wireless code can be found on a small sticker on the cable near the motor head.

The radio code for the Smart weather sensor is printed on the underside of the device and on a sticker inside the housing.

Devices with operating buttons can be switched to registration mode directly on the device.

RolloTron smart flush-mounted belt winder premium - In menu 9-9-1, press the Open setting button

Smart programmable timer premium - press the On setting button in menu 9-9-1

Smart thermostat premium - press the Up setting button in menu 9-9-1

Smart programmable timer classic - press and hold the clock and stop buttons simultaneously for 4 seconds

Press the Smart Plug button on the device for 1-2 seconds

More detailed information can be found under the search term "Login mode Device name"