Registration of the Abus cameras at the Premium gateway.

You have the option of registering certain cameras from the manufacturer Abus with the Premium gateway, provided they support the ONVIF protocol T.

The following steps are necessary for registration.

1. Start up the camera via the PC interface according to the manufacturer's instructions.
   Notes:
   The camera interface can usually be opened by entering the IP address of the camera in the browser.
   A password must be assigned during the initial start-up.
   The user of the Abus camera is installer
   
   
2. Check the firmware of the camera in the Dashboard. Possible updates can be found on the Abus homepage.
   
   
   
3. With newer Abus cameras, the ONVIF function must still be activated and a user added.
   To do this, click on Network - Advanced Settings. Integration Protocol. Activate the function "Activate Open Network Video Interface".
   
   
   
   Then add a user. This user will be used when logging in to the Premium gateway.
4. Activate the function "Event-controlled single image capture" under Storage - Single image capture - Capture parameters. Save the setting.
   
   
   
   
5. In order to be able to use the motion detection of the camera in the Premium gateway, please activate "Activate motion detection" under Detectors - Motion detection.
   
   
   
6. Now you can start the login mode on the Premium gateway if the camera is in the same network as the Premium gateway. After a short time, the camera is displayed as a new device. Click on "Login" and enter the access data. The user is installer, the password is the one used to access the camera interface.
   For the newer cameras, the ONVIF user data is entered.

You can use the camera's motion detection as an event in triggers and thus trigger complex routines.
You can also have pictures sent to you by e-mail via the Premium gateway as soon as motion is detected. To do this, the notification is activated in the trigger under THEN.

In addition, all functions of the Abus camera can of course still be used.

Note: Only individual images are displayed in the HOMEPILOT APP. If necessary, a live image can be called up via apps from Abus. Information on this can be found on the Abus website.