What applications are possible with the Smart thermostat premium?
The Smart thermostat premium can be operated in a wide variety of applications. In all applications, you have the option of operating the Smart thermostat premium with or without the Premium gateway. If you want to use the Premium gateway for time control, set the menu item
9-9-2 to 1.
In all applications you have the option of registering a Smart door and window contact directly with the Smart thermostat premium. As soon as the window is opened, the Smart thermostat premium will regulate the temperature down to 4°C and after the contact is closed, it will regulate it back up to the last set value.
Application 1:
Underfloor heating with direct cable connection between thermostat and heater
Direct control of electro-thermal control valves for underfloor heating via direct cable connection.
The Smart thermostat premium opens and closes the valves depending on the setpoint and actual temperature.
In the same way, electric heaters, air conditioners, etc. can be connected directly to the Smart thermostat premium and controlled. For these applications, a cable connection from the Smart thermostat premium to the corresponding device is necessary.
The control can be carried out on the Smart thermostat premium itself or alternatively via the Premium gateway. If the Premium gateway is used for time control, item 1 is selected in menu item 9-9-2.
Application 2:
Underfloor heating WITHOUT direct cable connection between thermostat and heater
The Smart thermostat premium controls a 1- or 2-channel Smart light receiver by radio. This opens and closes the valves depending on the setpoint and actual temperature.
In the same way, electric heaters, air conditioners etc. can be controlled by radio via the Smart light receiver and the Smart thermostat premium. For these applications, no direct cable connection from the Smart thermostat premium to the corresponding device is necessary.
The control can be carried out on the Smart thermostat premium itself or alternatively via the Premium gateway. If the Premium gateway is used for time control, item 1 is selected in menu item 9-9-2.
Important: The Smart light receivers 1 or 2-channel are NOT registered on the Premium gateway in this application, but are controlled exclusively via the Smart thermostat premium.
Application 3:
Smart radiator valve control
A Smart thermostat premium can centrally control up to 20 Smart radiator valves. The individual Smart radiator valves are registered with the Smart thermostat premium.
The set temperature is used in the same way for all Smart radiator valves. In this application, you also have the option of specifying whether the actual temperature is also measured by the Smart thermostat premium or by the respective Smart radiator valve. As a rule, it makes sense to have the temperature measured by each Smart radiator valve itself, but if the drives are operated in niches or very cold walls, the measured temperature may deviate. In this case, the actual temperature from the Smart thermostat premium can be used. The changeover is made at the respective Smart radiator valve in the menu item SEn = Sensor external.
OFF = Measurement in the Smart radiator valve,
ON = Measurement in the Smart thermostat premium
The control can be done on the Smart thermostat premium itself or alternatively via the Premium gateway. If the Premium gateway is used for time control, item 1 is selected in menu item 9-9-2.