HOMEPILOT App Step 3: Register devices on the Premium gateway. Activate login mode.
In order to control your devices via the app, they must be registered once with the Premium gateway.
This is easily done by opening your HOMEPILOT App and then clicking on the small plus sign in the Devices section at the top right.
After that you can click Start to activate the login mode of the gateway. The login mode is active for about 15 minutes.
Depending on which device you want to log in, there are different procedures.
Enrollment of our smart devices:
For our smart devices such as belt winders, shutter motors, timers or remote controls you have to activate the login mode now. This can be done either on the device itself or by entering a radio code, which motors and flush-mounted receivers have, for example.
The easiest way is to search here in the service center for the term login mode and the name of the device to get more information about the login.
Logon of ONVIF cameras:
ONVIF cameras are automatically found in the network without having to start a login mode on the camera. Depending on the camera manufacturer, you may need to create an ONVIF user before the camera can be found.
Login of Zigbee devices: (you need an addZ Stick for Premium gateway)
Your addZ or Zigbee lamps or plug-ins just need to be switched on and in factory state. As soon as the login mode is activated on the Premium gateway, the devices will be found.
Philips Hue Bridge login:
If you have a Philips Hue Bridge, the gateway will find it immediately. You only have to press the button on the Hue Bridge once to confirm.